Wire Tape Machine Automatic Tape Equipment Labeling Machine – 3D Model SolidWorks

Wire adhesive tape machine automatic tape equipment labeling machine 3D model sharing. Solidworks2012 can be edited, including parameters. Wire adhesive tape machine household wire adhesive tape equipment 1. Equipment description This equipment is suitable for products: industrial wires, FPC cables, 0.3-0.8MM wire diameter, various types of household industrial wire adhesive labeling. This equipment is a processing equipment for wire gluing and labeling: the equipment is mainly used for cutting and gluing wires. The equipment is mainly for gluing small-core wires. The glue paper mechanism is a two-layer two-group glue machine. The incoming wires can also be arranged with up to 50 wires. The number of wires can be automatically selected and arranged. The size of the glue tape can also be selected. When the wire enters the gluing station, the glue pulling mechanism pulls out the glue paper and cuts it off and then sticks it on the wire. The upper and lower sides are labeled together to bind the wires together. The battery core glue pulling structure is a stepper motor moving structure with a complex structure. The switchboard uses 2 servo motors and a stepper motor and 15 cylinders. This is a complex and precise equipment. The labeling head and label suction are vacuum adsorption type. The length of the glue position can be adjusted according to requirements. The adjustable range is relatively large. The wire feeding structure is also cleverly designed. Since the movements in the equipment are relatively complex and there are many cylinders, you can analyze and study it carefully after downloading, and you will definitely learn a lot. I will not give other detailed introductions here. The above is the entire structure and working principle of this equipment. 2. The main structures of the equipment are as follows: 1. Robot: The gluing, pressing and transferring robot is divided into two axes, X-axis and Z-axis, with precise positioning. 2. Gluing machine: The upper and lower sets of gluing feeding mechanisms are similar to the principle of the labeling machine. The cutting accuracy length can be controlled within the range of 0.05, the speed can reach about 2,000 pieces of adhesive tape per hour, and there is a lack of material alarm function. 3. Wire feeding position: The wire feeding position structure is cleverly designed to paste tape and label paper for 50 wires at the same time. 4. Wire transfer: The length and shifting structure of the wire adopts the stepper motor and cylinder clamping method with high efficiency. The above are the functions and principles of this equipment. You can download and study other ingenious design structures slowly when you have time. In short, this is a very good set of wire tape machine drawings. Welcome to study and study. Thank you. Main technical parameters: Category specifications and parameters Overall dimensions of the whole machine: 850*720*1700MM (L*W*H) Input voltage: AC-220V50Hz or AC-380V 50Hz optional Maximum power of the whole machine: 1.1KW (at 220V) Input air source pressure: 0.4-0.6 Mpa Gas consumption: 1.5 L/min Production efficiency (C/T): ≤4.0 S/a Equipment load rate: ≥95% Processing method: automatic wire feeding, glue feeding, automatic glue sticking, automatic cutting and unloading Robot movement resolution: 0.005 mm Robot repeat positioning accuracy: ≤±0.01 mm Material change method: manual material change