Wire Sticking Tape Machine Automatic Sticking Tape Equipment Labeling Machine SolidWorks 3D Model

Wire sticker tape machine automatic sticker tape equipment labeling machine 3D model to share. solidworks2012 can be edited, with parameters. Wire sticker adhesive paper machine household wire sticker tape equipment I. Equipment Description This equipment applies to the following products: industrial wires, FPC wires, 0.3-0.8MM wire diameter, all kinds of household industrial wire sticker labeling. The equipment is a wire gluing labeling processing equipment: equipment is mainly used for wire cutting and gluing, equipment is mainly for small-core wire gluing, gluing paper mechanism for the upper and lower two layers of two groups of gluing machine, wire feed can also be arranged up to 50 wires, the number of wires can be automatically line selection and arrangement, gluing tape size can also be selected, wire into the gluing station, the gluing mechanism by the gum pulling out of the glue paper and then affixed to the wire above, cut and then affixed to the wire. Cut and then stick to the wire above, up and down the two sides of the labeling together to bind the wires together, the core gluing and pulling structure for the stepper motor mobile structure is complex, the total machine using two servo motors and a stepper motor and 15 cylinder configuration, this is a complex structure of precision equipment, labeling head and suction labeling for the vacuum adsorption type, the position of the length of the glue can be adjusted according to the requirements of the adjustable range of the larger wire feeding structure is also more cleverly designed. Is also a more ingenious design, due to the more complex actions in the equipment cylinder is also more, download can be carefully analyzed and studied, you can learn a lot of things, not much else in this detailed introduction, the above all the knots and working principle of this equipment. II. The main structure of the equipment are as follows: 1, manipulator: gluing press moving load manipulator X-axis and Z-axis two axes positioning accuracy. 2, gluing machine: the upper and lower two sets of gluing and feeding institutions and labeling machine principle is similar, cutting the length of the material precision can be controlled in the range of 0.05, the speed can be up to 2,000 pieces of adhesive paper per small, and there is a lack of material alarm function. 3, send line position: send line position structure design clever can be the same paste 50 wires of tape and labeling paper. 4, wire transfer load: the length of the wire and shift the structure of the stepper motor and cylinder clamping the way of higher efficiency. Above is the function and principle of this equipment, other more clever design structure you can download after time to slowly learn to study, in short, this is a very good set of wire sticker tape machine drawings, welcome to learn to study Thank you Main Technical Parameters: Category Specifications Dimensions: 850 * 720 * 1700MM (L * W * H) Input Voltage: AC -220V50Hz or AC-380V 50Hz optional machine maximum power : 1.1K W (220V) input gas pressure : 0.4-0.6 Mpa gas consumption : 1.5 L/min production efficiency (C / T) : ≤ 4.0 S / a equipment load rate : ≥ 95% processing mode : Automatic Send line, send glue, automatic gluing, automatic cutting and discharging robot movement resolution: 0.005 mm robot repetitive positioning accuracy: ≤ ± 0.01 mm material change mode: manual change of material