TTI Non-Standard Fully Automatic Assembly Bearing Press Machine (Including BOM List) Bearing Beer Pressing Equipment Bearing Assembly Machine – 3D Model SolidWorks

Bearing beer pressing equipment, bearing assembly machine, TTI non-standard fully automatic assembly bearing pressing machine (including BOM list), bearing hardware automatic assembly machine, this set of equipment that assembles bearings and hardware covers together, belongs to the assembly type of automated machine, the main working principle of the equipment is that the left and right sides are fed, the middle is processed, and the back is the unloading station, first is the bearing loading position on the left, the bearings are stacked up and there is a material dividing cylinder at the bottom to clamp them away, the same is true on the right, the right is used to install hardware products, that is, the parts that need to be assembled with the bearings, and they are also stacked and loaded. The front material picking robot first takes the bearing, puts the bearing in the middle fixture, and then goes to the material picking position on the right to get the hardware, and then puts the two parts together, and presses them together through the large cylinder in the middle. After each one is installed, the product is taken away by the material picking cylinder at the back. This operation method meets the needs and is also the simplest method. The design idea is very good, so this complete set of pictures is uploaded for your convenience. If you like it, please enter the homepage to download more original and good drawings. Thank you