Three-Station Lamp Production Assembly Equipment Assembly Line SolidWorks 3D Model

This is a set of lamp production equipment, can be driven by electricity and gas and manual to complete the assembly of lamps (Fender and Trunk lamps), is a set of non-standard equipment. (However, it can be used to produce other lamps by changing the PLC to tighten the workpiece and operation, which is a very good reference for lamp assembly equipment design) This set of equipment is divided into three stations: ST09 station installs the fixing screws, semi-permeable film and gaskets to the lamp shell; ST12 station winds up the protective film and scanning labels; and ST13 station affixes the barcode to the whole box body. ….. ST09 workstation operation process description: 1. Take semi-finished products to the corresponding tooling, clamping tooling to lock the product; n 2. Take the fixing screws and install them to the lamp shell; n 3. Take the translucent film and gasket and install them into the lamp shell; n 4. Remove the model and put it to the next station. ….. ST12 workstation operation process description: 1.Take the product and put it on the workpiece; n 2.Detect the appearance, cleaning, punching; n 3.Wrap the protective film; n 4. Scan the label information. n ST13 workstation operation process description: 1.Take the product and put it on the worktable; n 2.Detect the appearance, lighting and punching; n 3. Boxing; n 4. In the bar code printer to go to the whole box bar code on the whole box packaging.