Square Lithium-Ion Battery Glue And Shell Machine (Automatically Load Lithium Batteries Into Aluminum Shells) – 3D Model SolidWorks

The 3D model of the square lithium-ion battery glue-in-shell machine is provided by SW Design sldasm, sldprt source files (about 1000 files). This equipment is only used for special equipment for automatically loading square lithium batteries into square aluminum shells. The scope of application: glue-in at the positive electrode tab, glue-in at the negative electrode tab, glue-in at the coating blank line, and glue-in at the PTC position of the finished soft-pack battery.
The square lithium-ion battery glue-in-shell machine is used to paste the bottom adhesive tape on the square lithium-ion battery, and automatically load the battery into the aluminum shell. Glue-in part: 1. The glue feeding method is linear glue feeding, which is cut off after fixed-length adsorption. The length of the adhesive tape is adjustable and the glue-in position is unified; 2. The glue-in method is semi-rolling glue; 3. This machine is made of precision machining and combined with high-performance electrical components, and is suitable for a wide range of models; 4. This machine has a fault stop function, and at the same time sends an alarm message, and has an accurate counting function. Shell feeding part: 1. The aluminum shell feeding method is the superposition of clips; 2. The battery cell feeding method is the superposition of clips, etc. The equipment structure is complex and worth learning. Welcome to download the square lithium-ion battery glue shell feeding machine.