SMC Automatic Sorting Equipment B SolidWorks 3D Model

This device mechanism is designed by SW2016 including parts characteristics can be edited. Adaptation range: suitable for diameter ∮4~ ∮22mm, shell length 8~40mm, test voltage from 0V~5VDC.Test item: ESR (1KHz) fixed current pulse charging charging 60s charging voltage. Test process: The container will be fed through the vibrating material tray, and then moved to the test conveyor chain through the flat feeding and robotic handover feeding. Then do polarity detection, stepping motor for automatic commutation. Test voltage greater than 20mV product into the retest box. Test equivalent series resistance ESR (frequency 1KHz, apply 1mA or 10mA current, detect the container end voltage V). The internal resistance test instrument records the measured ESR grading interval (high ESR, low ESR). bad ESR is directly discharged from the material, followed by the detection of open-circuit and short-circuit, and enter the open-circuit and short-circuit material box. Constant current charging current can be set. It will be charged by pulse in the test chain for 60s±0.1s to test the voltage at the end of the container; the voltage failed product will enter into the bad voltage box. Then enter the load discharge and short-circuit discharge section, six kinds are put into the corresponding material box. Vibrating tray feeding system Power supply single-phase AC220V,50/60Hz Open-circuit short-circuit detection detection power supply DC0V-5V10A 60s charging voltage detection Single constant current setting range: 0.01A-5A can be set, precision <1%; charging time: 60s ± 0.1s; display the set value; voltage test precision: display value ± 1%; ESR test Test range 0.0001Ω-999.99MΩ; automatically shift from the upper limit of the set value to mΩ,Ω,KΩ,MΩ; Display mode: LCD Accuracy: display value ±1%; Setting mode: can be set up in intervals, display the set value. STP format included.