SMC Automatic Sorting Equipment B – 3D Model SolidWorks

The mechanism of this equipment is designed by SW2016 and contains editable part features. Applicable range: suitable for diameter ∮4～∮22mm, shell length 8~40mm, test voltage from 0V~5VDC. Test items: ESR (1KHz) pulse charging and charging voltage for 60s under fixed current. Test process: The container is fed through the vibrating material tray, and moved to the test conveyor chain through horizontal feeding and robot handover feeding. Then do polarity detection, and the stepper motor performs automatic reversing. Products with a test voltage greater than 20mV enter the re-test material box. Test the equivalent series resistance ESR (frequency 1KHz, apply 1mA or 10mA current, and detect the container end voltage V). The internal resistance test instrument records the measured ESR grading interval (high ESR, low ESR). If the ESR is bad, the material is directly discharged, and then the open circuit and short circuit are detected, and then enter the open circuit and short circuit material box. The constant current charging current can be set. Pulse charging will be performed on the test chain for 60s±0.1s. Conduct voltage test on container end; unqualified voltage products enter bad voltage material box. Then enter load discharge and short circuit discharge section, and six kinds are placed in corresponding material boxes respectively. Power supply of vibration plate feeding system single phase AC220V, 50/60Hz Open circuit short circuit detection detection power supply DC0V-5V10A 60s charging voltage detection single channel constant current setting range: 0.01A-5A can be set, accuracy <1%; charging time: 60s±0.1s; display set value; voltage test accuracy: display value ±1%; ESR test test range 0.0001Ω-999.99MΩ; automatic shifting from the upper limit of the set value mΩ, Ω, KΩ, MΩ; display mode: LCD display accuracy: display value ±1%; setting mode: the grading interval can be set and the set value is displayed. Including STP format.