Shaped Steel Cage Automatic Row Welding Machine (Mass Production) SolidWorks 3D Model

Shaped steel cage automatic row welding machine, which mainly consists of machine frame, warp wire guiding mechanism, longitudinal welding mechanism, feeding mechanism, transverse welding mechanism, warp wire traction mechanism, guide rail, weft wire pushing mechanism and transmission mechanism. The warp wire guide is fixed at the front end of the frame, the welder is fixed to the frame and is located directly above the warp wire guide, the feeder is located behind the longitudinal welder and is fixed to the rear end of the frame, the transverse welder is located at the side of the frame, the warp wire traction mechanism is arranged on a guide rail, the weft wire pusher is located at the side of the warp wire guide and is fixed to the inner side of the frame, and the transmission is located in the inner part of the frame and enables the longitudinal welder, the feeder and the weft wire pusher to be fixed to the inner side of the frame. The drive mechanism is located inside the frame and links the longitudinal welding mechanism, the feeding mechanism and the weft wire pushing mechanism. It not only makes it possible to make profile welding, but also has precision automaticity, replaces manual labor, reduces labor intensity and greatly improves the efficiency of profile welding, which can be widely used in many fields such as engineering and construction. n1-frame, 2-warp bar, 3-warp guiding mechanism, 31-guiding hole, 4-longitudinal welding mechanism, 41-longitudinal electrode plate, 42-longitudinal welding gun, 43-torch support table, 44-crank slider mechanism, 45-weft positioning stopper, 46-longitudinal welding bracket, 5-feeding mechanism, 51-groove wheel mechanism, 52-feeding wheel, 521-feeding groove, 53-feeding box , 531-ramp plate, 532-mounting plate, 54-feed guide bracket, 541-upper guide bracket, 542-lower guide bracket, 543-pitch adjusting plate, 544-fixing plate, 545-adjusting spring, 546-bump, 55-transmission shaft, 6-transverse weld mechanism, 61-transverse weld gun holder, 62-transverse weld gun, 63-transverse electrode plate, 64-transverse electrode plate Fixing bracket, 65-Welding contact switch, 66-Hydraulic cylinder, 7-Warp traction mechanism, 71-Electromagnetic sleeve, 72-Gear, 73-Stepping motor, 74-Traction mechanism contact switch, 75-Warp locking contact switch, 76-Traction bracket, 8-Guide rails, 9-Control panel, 10-Weft pushing mechanism, 101-Cam mechanism, 102-Pushing bar, 103-Pushing bar 101-cam mechanism, 102-pushing rod, 103-pushing rod holder, 104-sloping slide, 105-sliding rod, 11-transmission mechanism, 111-main motor, 112-reducing gearbox, 12-weft wire reinforcement.