Robotic CNC Milling System (Automatic Milling Workstation) SolidWorks 3D Model

This project is an automatic milling workstation, the workstation adopts a special quick-change switching fixture mode (a total of 10 sets), quick-change fixture set with a special storage rack, quick-change fixture storage rack with casters at the bottom of the artificially moved, this milling system adopts a single robot to drive the motorized milling head for milling workpieces, the milling device has a total of one set. The milling device contains 1: electric milling head (Hitech), 2 end mill shanks; a number of 3-flute / 4-flute end mills; the system provides a special end mill grinder for grinding the bottom edge of the worn end mills, replacement of milling cutter or milling cutter wear can be automatically compensated for the corresponding height difference through the detection of the tool setter; the system is installed with demagnetizers, which can be installed in the specified time for the elimination of magnetism for the electric milling head, the fixture installation The base can be compatible with a variety of products, each product is installed through the positioning of the quick-change, the system protection fence is assembled with aluminum profile assembled skeleton and inlaid with 36.5*36.5*2.5 black protection mesh and PC endurance boards, the system protection fence adopts the style of the back opening and closing of the safety gate; the two sides of the system protection fence are installed with explosion-proof LED lights to provide a source of illumination for the system; the right inside of the system protection fence is installed with a toolholder preventive frame and a pair of toolholder preventive frame and a pair of toolholder preventive frame. The right side of the system enclosure is equipped with a toolholder prevention rack and a tool setting instrument, and the toolholder placement position is equipped with an in-position detection switch, which is convenient for the robot to automatically switch the toolholder and quickly calibrate the tool. n Includes 3D model+Automatic Milling System Project BOM sheet – Outsourced Parts (Required).xlsx