Rittal PS Electrical Cabinet – 3D Model SolidWorks

1. Imitation Rittal PS cabinet box Rittal PS electric cabinet sheet metal cabinet is 20mm above the ground 2. 2.5mm thick installation plate, with 20mm wide U-shaped bends on both sides, which makes the installation plate stronger and easier to carry. 3. The three cable entry covers at the bottom of the box can be replaced with each other, easy to move, easy to import cables, and easy to open holes for entry. 4. Load-bearing hinges, easy to install, easy to change cabinet doors, and the door can be opened 130 degrees. 5. Grounding screws. 6. Plastic guide can use the plastic guide to push the installation plate into the cabinet from the front through the guide rail. 7. The front door uses 20X20 professional square tube reinforcement ribs to improve the strength of the door panel. 8. The back panel can be easily installed and fixed with screws, which can be easily disassembled. 9. EMKA1225 lock, top, middle, bottom, three-point locking of the door panel. 10. Sealing ring: polyurethane point glue foam sealing strip to ensure the protection level 11. The internal installation light is convenient for detection and maintenance. 12. Document bag 13. Fan and filter to ensure ventilation in the cabinet (optional) 14. Base (optional) 15. Single or double installation board (optional) 16. Door panel installation strip to facilitate the installation of the wiring trough.