RCO Activated Carbon Adsorption Desorption And Catalytic Combustion Equipment SolidWorks 3D Model

VOCs waste gas treatment device of activated carbon adsorption, desorption – and catalytic combustion device design drawings activated carbon adsorption + desorption three-dimensional diagram, adsorption capacity of 40,000m3/h, desorption capacity of 1000m3/h, using three towers adsorption and one tower desorption work mode. Honeycomb activated carbon bed + catalyst catalytic oxidation combustion device system diagram contains drawings of the front section filtration system, duct piping, fans, system chimneys, valves, equipment climbing ladders, platforms, brackets, equipment monolithic dimensional drawings and other drawings The process is to stop the main fan when the adsorption bed adsorption is saturated; close the valve of the inlet and outlet of adsorption box. Catalytic combustion furnace each time the operation of the first empty run to warm up 40 minutes, and then start the desorption fan on the adsorption bed desorption, desorption of the gas first through the catalytic bed in the heat exchanger, and then into the catalytic bed in the preheater, in the role of the electric heater, so that the temperature of the gas to 220 ℃ or so, and then through the catalyst, the organic material in the catalyst under the action of the combustion, was decomposed into CO2 and H2O to achieve the purpose of purification of exhaust gas Purpose