OP40 Output Shaft With Drilling Pin Inventor 3D Model

OP40 Output shaft assembly drilling and pinning n1.Purpose: Combining, centering, drilling stranded holes, piercing pins, and riveting the output shaft assembly with the lower part of the input shaft assembly; n2.Compatible products: n3.Equipment specification: 2000mm(W)x2000mm(L)x2000mm(Aluminum profile H). n4. Equipment color: RAL7035n5.Production beat: ≤ 45sn6. Equipment technical parameters n6.1 Equipment power: 20kw;n6.2 Gas source: ≥ 0.5Mpa oil-free, water-free clean compressed gas source. Gas consumption: 10 liters/min. n6.3 Equipment operation form: product loading/unloading is executed by the operator (manually), workpiece positioning, drilling, pin threading, riveting and pressing are completed automatically; n6.4 Indentation force monitoring: range 30KN, precision 1% R.O; holding time of not less than 3 seconds; bearing and screw service life ≥ 10 million times. n6.5 Press-in depth control: precision 0.02mm; with its own displacement control, and can be connected to high-precision displacement sensor n6.6 Press-in judgment: whether the pressure and displacement are within the qualified range. n6.7 Machine Replacement: The jigs and fixtures to be replaced are placed under the equipment, and a special placement disk is manufactured. n6.8 proofreading standard parts: equipment randomly provided to correct the coaxiality of the equipment, displacement of the special tools, tools are stored in a special apparatus, the special apparatus is fixed on the equipment. n6.9 Equipment CPK ≥ 1.33