OP230 Upper And Lower Pipe String Press Assembly – 3D Model Inventor

Add to wishlistAdded to wishlistRemoved from wishlist 0

This Project only for Members

A

OP230 upper and lower pipe column press assembly
1.Purpose: Press the upper pipe column assembly into the lower pipe column assembly. The upper pipe column mounting bracket has a phase relationship with the lower pipe column mounting hole
2.Equipment specifications: 800mm(W)x1200mm(L)x2000mm(aluminum profile H).
3.Equipment technical parameters
3.1Equipment power: 4kw;
3.2Air source: ≥ 0.5Mpa oil-free, water-free clean compressed air source. Air consumption: 1L/min.
3.3Equipment operation mode: Product loading/unloading is performed by the operator (manually), and assembly work is completed by the equipment (automatically)
3.4Pressing force monitoring: The press pressure is 10KN, the pressure sensor accuracy is 0.3%FS, the equipment has a self-calibration function, and there is a segmented monitoring curve.
3.5 Press-in displacement monitoring: accuracy ±0.02mm, full stroke monitoring.
3.6 Qualification judgment: whether the pressure and displacement are within the qualified range.
3.7 Position accuracy: the coaxiality between the center hole of the pressure head positioning and the tooling positioning installation hole is less than 0.05mm, and the verticality between the pressure head and the worktable is 0.05mm.
3.8 Equipment requirements: The pressure head adopts a floating mechanism while ensuring rigidity; the pressure head and fixture are equipped with identifiable sensors, and the equipment can automatically identify them.
3.9 Machine model replacement: The tooling fixture to be replaced is placed under the equipment, and a special placement plate is manufactured.
3.10 Equipment CPK value ≥1.33; the precision of the pressed parts and the pressing precision are accepted according to the requirements of the drawings.
4. Compatible products: XK507C, JLFC3C, SP232C

Specification: OP230 Upper And Lower Pipe String Press Assembly – 3D Model Inventor

Industrial Use

Design Software

Version

Editable

File Formats

, , ,

Sharing Level

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “OP230 Upper And Lower Pipe String Press Assembly – 3D Model Inventor”

OP230 Upper And Lower Pipe String Press Assembly – 3D Model Inventor
OP230 Upper And Lower Pipe String Press Assembly – 3D Model Inventor
3D Mechanical Design Library
Logo
Shopping cart