OP230 Upper And Lower Column Press-Fit Inventor 3D Model

OP230 Upper and Lower Tube Column Press-Fit n1.Purpose: Press the upper tube column barrel assembly into the lower tube column barrel assembly, the upper tube column barrel mounting bracket has a phase relationship with the lower tube column barrel mounting holes n2. Equipment specification: 800mm (W) x 1200mm (L) x 2000mm (aluminum profile H). n3.Equipment technical parameters n3.1 Equipment power: 4kw; n3.2 Gas source: ≥ 0.5Mpa oil-free, water-free clean compressed gas source. Gas consumption: 1L/min. n3.3 Equipment operation form: product loading/unloading is executed by the operator (manual), assembly work is completed by the equipment (automatic) n3.4 Indentation force monitoring: press pressure is 10KN, pressure sensor precision 0.3%FS, equipment with self-calibration function, with segmented monitoring curve. n3.5 Indentation displacement monitoring: precision ±0.02mm, full-stroke monitoring. n3.6 Qualified judgment: whether the pressure and displacement are within the qualified range. n3.7 Positional accuracy: the coaxiality between the center hole of indenter positioning and the mounting hole of tooling positioning is less than 0.05mm, and the perpendicularity between the indenter and the working table surface is 0.05mm. n3.8 Equipment requirements: the indenter adopts a floatable mechanism, and at the same time ensure the rigidity; the indenter and fixture with recognizable sensors, the equipment can be automatically identified. n3.9 Machine Replacement: The jigs and fixtures to be replaced are placed under the equipment, and a special placing tray is manufactured. n3.10 CPK value of the equipment ≥ 1.33; precision of the parts to be pressed and mounted and the precision of the press mounting are accepted according to the drawings. n4.Compatible products: XK507C, JLFC3C, SP232C