OP210 Upper Housing Bushing Press-Fit – 3D Model Inventor

OP210 upper box bushing press-fitting
1.Purpose: Grease the upper box and press the bushing into the upper box;
2.Equipment specifications: 1000mm(W)x1400mm(L)x2000mm(aluminum profile H).
3.Equipment technical parameters
3.1Equipment power: 5kw;
3.2Air source: ≥ 0.5Mpa oil-free, water-free clean compressed air source. Air consumption: 5L/min.
3.3Equipment operation mode: Product loading/unloading is performed by the operator (manual), bushing is automatically loaded, and press-fitting work is completed by the equipment (automatic)
3.4Press-in force monitoring: Pressure sensor range 10KN, accuracy 0.3%FS, with self-calibration function, and segmented monitoring curve.
3.5 Press-in displacement monitoring: stroke 300mm, accuracy ±0.02mm, full stroke monitoring.
3.6 Press-fit judgment: whether the pressure and displacement are within the qualified range.
3.7 Position accuracy: the coaxiality between the center hole of the pressure head positioning and the tooling positioning installation hole is less than 0.05mm, and the verticality between the pressure head and the worktable is 0.05mm.
3.8 Equipment requirements: The pressure head adopts a floating mechanism while ensuring rigidity; the pressure head and fixture are equipped with identifiable sensors, and the equipment can automatically identify them.
3.9 Machine model replacement: The tooling fixture to be replaced is placed under the equipment, and a special placement plate is manufactured.
3.10 Equipment CPK value ≥1.33; the precision of the pressed parts and the pressing precision are accepted according to the requirements of the drawings.
4. Compatible products: XK507C, JLFC3C, SP232C