OP210 Upper Case Bushing Press-Fit Inventor 3D Model

OP210 Upper case bushing press fit n1.Purpose: Upper box body greasing and pressing the bushing into the upper box body; n2. Equipment specification: 1000mm(W)x1400mm(L)x2000mm(Aluminum profile H). n3.Equipment technical parameters n3.1 Equipment power: 5kw; n3.2 Gas source: ≥ 0.5Mpa oil-free, water-free clean compressed gas source. Gas consumption: 5 liters/min. n3.3 Equipment operation form: product loading/unloading is executed by the operator (manually), the bushing is automatically loaded and the press-fitting work is completed by the equipment (automatically) n3.4 Press-in force monitoring: pressure sensor range 10KN, accuracy 0.3%FS, with self-calibration function, with segmented monitoring curve. n3.5 Press-in displacement monitoring: Stroke 300mm, accuracy ±0.02mm, full-stroke monitoring. n3.6 Press-in judgment: whether the pressure and displacement are within the qualified range. n3.7 Positional accuracy: the coaxiality of the center hole of press head positioning and the positioning and mounting holes of the workpiece is less than 0.05mm, and the perpendicularity of the press head and the worktable surface is 0.05mm. n3.8 Equipment requirements: the indenter adopts a floatable mechanism, and at the same time ensure rigidity; indenter, fixture with recognizable sensors, equipment can be automatically identified. n3.9 Machine Replacement: The jigs and fixtures to be replaced are placed under the equipment, and a special placing tray is manufactured. n3.10 CPK value of the equipment ≥ 1.33; precision of the parts to be pressed and mounted and the precision of the press mounting are accepted according to the drawings. n4.Compatible products: XK507C, JLFC3C, SP232C