OP190 Locking Sleeve Press Fit Inventor 3D Model

OP190 Lock Bushing Press Fit n1.Purpose: steering shaft oiling; press-fitting lock bush, bushing and steering shaft together as required n2. Equipment specification: 1200mm(W)x1400mm(L)x2000mm(Aluminum profile H). n3 Equipment technical parameters n3.1 Equipment power: 7.5kw; n3.2 Gas source: ≥ 0.5Mpa oil-free, water-free clean compressed gas source. Gas consumption: 5L/min. n3.3 Equipment operation form: product loading/unloading is executed by the operator (manually), oiling and press-fitting work is completed by the equipment (automatically). n3.4 Indentation force monitoring: Indentation force monitoring: press pressure is 50KN, pressure sensor accuracy 0.3%FS, equipment with self-calibration function, with segmented monitoring curve. n3.5 Indentation displacement monitoring: precision ±0.02mm, full-stroke monitoring. n3.6 Qualified judgment: whether the pressure and displacement are within the qualified range n3.7 Positional accuracy: the coaxiality of the indenter positioning center hole and the workpiece positioning mounting hole is less than 0.05mm, and the perpendicularity of the indenter and the worktable surface is 0.05mm. n3.8 Equipment requirements: the indenter adopts a floatable mechanism, and at the same time ensure rigidity; indenter, fixture with recognizable sensors, equipment can be automatically identified. n3.9 Machine Replacement: The jigs and fixtures to be replaced are placed under the equipment, and a special placing tray is manufactured. n3.10 CPK value of the equipment ≥ 1.33; precision of the parts to be pressed and mounted and the precision of the press mounting are accepted according to the drawings. n4.Compatible products: XK507C, JLFC3C, SP232C