OP180A Column Bearing Press-Fit And Axial Riveting – 3D Model Inventor

OP180A pipe column bearing press and axial riveting
1.Purpose: Press the bearing into the upper pipe column and perform multi-point axial riveting on the pipe column tube;
2.Equipment operation process
1) Take the upper pipe column tube, and put it into the lower positioning tool after the visual inspection is qualified, and the sensor senses it in place (manual 3s)
2) Take the bearing, and put it into the upper pressure head after the visual inspection is qualified, and the sensor senses it in place (manual 3s)
3) Press the start button (manual 1s)
4) The servo press drives the pressure head to press down (automatic 7s)
5) After the press is completed, the pressure head automatically returns (automatic 3s).
.6) The transfer cylinder moves the product horizontally to the riveting station (automatic 2s)
7) The servo press drives the riveting head to press down (automatic 7s)
8) After the press is completed, the head automatically returns (automatic 3s)
9) The horizontal transfer cylinder is reset (automatic 2s)
10) The finished part is removed manually, the bearing rotates flexibly without jamming, and is transferred to the temporary storage station (unqualified alarm, manually remove the unqualified workpiece, put it in the NG box, trigger the NG photoelectric, and reset the system) (manual 2s)
Production cycle: ≤33s
3. Compatible products: XK507C, SP232C