A nonwoven testing program requirements (mandatory items, key testing) n1.Product name: SL100, n2. Nonwoven width 1100mm, length unlimited n3.Detect the holes, stains, black spots on the top of the nonwoven fabric, area size 1mm*1mm n4.Speed requirement 200m/min n5. Defective products storage nB Detection of defective products (auxiliary detection) n1.Product name: N29, n2. Two UV light sources (UV fluorescent lamps), wavelength 365nm n3.Defects Requirements are not given requirements, to the site set n The original equipment with Siemens PLC, if a problem is detected, give the NG signal, n If there is a problem detected, it will give a NG signal and stop at a specific position in the back, cut out the problematic part manually, stick it with adhesive tape, and continue the production.
Specification: Nonwoven Inspection Machine SolidWorks 3D Model
|
User Reviews
Be the first to review “Nonwoven Inspection Machine SolidWorks 3D Model”
You must be logged in to post a review.
![Nonwoven Inspection Machine SolidWorks 3D Model](https://3dmec.net/wp-content/uploads/thumbs_dir/220011010-101-1-qpqjfv00n84do8ufptmbyse1vydz2qceh31uwxlv5o.png)
There are no reviews yet.