Non-Standard Fully Automatic Hot Pressing Shaping Machine With Robot Loading – 3D Model SolidWorks

Fully automatic robot loading and hot pressing shaping equipment is a fully automatic robot loading and hot pressing shaping equipment. First, let’s introduce the major modules of the equipment. This equipment is divided into six modules: 1. Loading bin module, 2. Lifting module, 3. Material picking and moving handling robot module, 4. Rotating hot pressing module, 5. Shaping unloading module, 6. Discharging conveyor belt module. The following is an introduction to the functional operation principle of the equipment: The function of the loading bin is mainly used for product switching and storage. This material frame can stack 200 products. The bin automatically switches to suction when two groups of empty materials are used. The product is lifted by the lifting elevator module in the material frame. Operation, every time the robot takes away a piece of material, the lifting machine pushes out another piece of material. The material-taking robot sucks the product and puts it into the fixture for secondary positioning, and then puts it into the hot pressing fixture. The hot pressing structure automatically performs hot pressing for 3 seconds and then exits. The hot-pressed product is rotated by the rotating cylinder and placed in the bottom shaping fixture. The product slides into the shaping structure for shaping. The shaping time of this product is 2 minutes. When the shaping is completed, the product is sucked out and the slide slides out, and the product is placed in the discharge conveyor belt for unloading. The above is the complete structural principle and function description of this mobile phone steel sheet feeding and hot pressing shaping equipment. The equipment structure is mature and stable.