Non-Standard Conveyor Belt 2.4 Meters High Lift Conveyor Belt Machine – 3D Model SolidWorks
Non-standard conveyor belt high altitude 2.4 meters lift conveyor belt machine design drawing. This drawing is a set of high-altitude conveying lifting and lowering machine, the lifting height is 2.4 meters, it can be lifted and lowered and operated with 90-degree conveying, the lift is driven by the bottom high-power motor, and two large sprockets are used for transmission at the top and bottom to ensure stable operation during the lifting process. In addition, the feed and discharge directions are 90 degrees, and the feed blocking cylinder blocks the carrier at different positions. When the sensor senses that the carrier needs to be transported to the next station, the blocking cylinder returns the conveyor belt to run. There are 2 sets of conveyor belts in this lift, one set of conveyor belts is for feed transportation, and this conveyor belt is driven by a cylinder to lift in a small space, and the other conveyor belt is responsible for discharging the carrier, jig, and other tooling plates to another line or another station. It can be seen from the picture that the structure of the conveyor belt is relatively complicated. Friends who are interested are welcome to download and study. There are many such conveyor lifting drawings on the homepage. Welcome to enter the homepage to browse or download more conveyor belt and elevator drawings
Specification: Non-Standard Conveyor Belt 2.4 Meters High Lift Conveyor Belt Machine – 3D Model SolidWorks
|
User Reviews
Be the first to review “Non-Standard Conveyor Belt 2.4 Meters High Lift Conveyor Belt Machine – 3D Model SolidWorks”
You must be logged in to post a review.
There are no reviews yet.