Micro Motor Assembly Machine Non-Standard Equipment / Automatic DC Motor Assembly Line SolidWorks 3D Model

Micro motor assembly machine non-standard equipment, automatic DC motor assembly line 3D digital model, the automation line equipment to meet the back cover automatic riveting bearing function; due to the assembly and function of the workstation is very much unable to introduce now can only be a simple preliminary introduction to the following functions: chassis automatic assembly machine, back cover riveting bearing machine, riveting bearing embossed needle structure and the existing Paul consistent, all the quality of the assembly and riveting welding dispensing, etc. are tested The overall operation of the equipment is stable. Bearing pressure spring pressing paste without deformation warping, four riveting point crimping reliable; bearing swing force 2.8 ~ 8kgfcm; cylinders, hydraulic presses need to ensure that the product riveting pressure is reliable; so in the design of the structure has been designed to be very compact. The position of adding glue is consistent with the sample; the rest of the position is not allowed to have glue; . No deformation or scratching is allowed after finishing the casing. . No deformation and warping of bearing compression spring, four riveting points are reliably crimped; . Bearing swing force 2.8 ~ 8kgfcm; equipment has a manual adjustment function, manual state, the machine’s actions in the touch screen with the corresponding keys, and signal output instructions; this set of fully automatic DC motor assembly line drawings, is a small motor on the needle miniature and the development of an unmanned automated line, the equipment for the back cover and the stator casing for the whole of the 1 man operation loading and unloading, the beat of ≤ 5 seconds, a single machine turnaround time ≤ 5 Minutes; machine for fully automatic operation, under normal circumstances without human intervention, up and down robot respectively have loading / unloading function, in addition to equipment to meet the shell automatic riveting bearings, into the magnetic tile, magnetization, welding terminals, glue function, there are cases, bearings, bearings, bearings, bearing compression springs, magnetic tiles, slingshot, terminals, glue automatic feeding (shell manually arranged), after the magnetization of the shell automatically detects magnetic flux after magnetization, the magnetic flux, the magnetic flux is not acceptable products need to be detected, with Non-conforming products need to be detected, there are defective product detection saving mechanism, continuous bad stop alarm function and glue adding machine A, B glue stirring, mixing evenly; is a most functional motor assembly line.