Lithium Battery Edge Voltage And Thickness Size Inspection Machine SolidWorks 3D Model

The machine is a battery PACK section of a battery side voltage thickness testing equipment, the equipment drawings have 300MB large and small parts map adds up to almost 500, the device’s 3D model using SolidWorks 2012 software design, a full set of drawings for the original design, the quality of the drawings is better than other members drawings are all original download can be directly opened using SolidWorks SolidWorks open, the device is a soft pack battery side voltage thickness testing equipment, its function is mainly to carry out side voltage thickness test of the battery, and other work, and finally the detection of good batteries grabbed to the downstream station, the detection of bad grabbed to the row of bad belt outflow, the equipment is fully automatic operation, its main structure consists of the following components: 1. automatic lifting loading tray assembly 2. automatic handling robot 3. Input belt module 4.Battery side voltage test, 4.Battery automatic code scanning module, 5. Battery leakage detection module, 6. Battery handling robot, 7. Detection of bad rows of belt line, 8. Battery thickness detection module, 9. Battery thickness detection of bad rows and discharging robot. The principle of action of the equipment is introduced: battery feeding is a blister plate feeding can be stacked at a time to load a lot of plates, using the stacking of the feeding method so that you do not have to change the material often, the plate from the feed belt line conveying in, when the detection in place by the bottom of the jacking mechanism of the top of the plate at a time a plate up, and then robots to take away the batteries in the plate for the feeding, the battery to grasp the completion of the empty plate and then by the robots to the other side of the grabbing to recycle, and then the next plate of material to use. Recycling, and then the next tray of material top up and then take the next tray of material in the battery, the battery by the robot to carry to the feeding belt in the battery from the belt into the feeding station first for the second positioning, the positioning mechanism at the back end of the feeding belt by the cylinder and sensor to complete the push material positioning action, and then by the next robot to grab the battery side voltage and leakage test, if there is a bad test will be put into the row of bad belt line out, the test is OK and then by the handling to the thickness of the material to the top of a tray of material up, then the robot take away the tray of battery to feed. Test OK and then by the handling to the thickness testing station for battery thickness test, the test is completed by the robot to grab the battery to the next station, the same defective products directly discharged, the good is again the next station for packaging and receiving, the above is the cell phone battery edge voltage thickness testing machine is introduced, due to the content of the drawings are more detailed structure and details need to download the drawings in order to understand more, this equipment is used for soft pack This equipment is used in soft pack battery PACK processing line, welcome to download and learn are very good.