Laser marking equipment action process: n1.The left side of the equipment manually puts in the product. n2.The product enters the inside of the equipment and is automatically marked on the front and back. n3. After marking the products from the right side of the equipment belt line collection. n4 Manual put the products in sequence on the left side. n5. After the sensor detects the first six products in the row, the clamping jaw cylinder clamps the products. n6 The blocking cylinder prevents the clamping jaws from colliding with the seventh product when clamping the first six products. n7. The electric cylinder drives the two sets of clamping jaws to synchronize the two actions of grasping and collecting materials. n8. The clamping jaw 1 clamps the left six products and puts them into the marking position, and the machine automatically carries out positive and negative marking. n9.Gripper 2 clamps the finished products into the right side belt line, the sensor detects the products in place, the belt line runs and the products are collected.
Specification: Laser Marking Equipment SolidWorks 3D Model
|
User Reviews
Be the first to review “Laser Marking Equipment SolidWorks 3D Model”
You must be logged in to post a review.
![Laser Marking Equipment SolidWorks 3D Model](https://3dmec.net/wp-content/uploads/thumbs_dir/220013869-101-1-qpqjfxtj7q88n2qc9cu7o9ofo402ptnlhh0bcrhon0.png)
There are no reviews yet.