Fully Automatic Nut Loading Rivet Nut Online Riveting Nut Equipment SolidWorks 3D Model

Automatic nut loading pull riveting nut online riveting nut equipment 3D model It is the drawing of Fontainebleau wind catching rack nut loading machine equipment, this automatic nut loading machine can realize automatic nut supply, automatic pull riveting nut, automatic discharging, which can greatly improve the production efficiency. Basic action principle Start the machine; 1. Operator will put the product into the step conveyor. 2. 2. Load the nut station (the nut is loaded from the vibration disk into the air catching frame by robot, and 4 nuts are loaded at the same time). 3. Riveting nut station (4 nuts are riveted at the same time), 4, the loading robot will rotate the product 90 degrees into the assembly line. 5, and so on. Manual only need to put the product into the step conveyor can be realized at the same time to send 4 nuts, pull riveting 4 nuts at the same time, including the angle of rotation out of the material to complete the series of actions only 10 seconds to complete the manual operation to complete these operations to 30 seconds, this machine to improve the efficiency of 3 times. Machine size: 3000X1500X1200 Input voltage: AC200V-AC240V,50HZ Internal voltage: 24VDC Input air pressure: 0.4Mp-0.8Mp Working mode: automatic/manual Efficiency: about 10 seconds a product.