Full-Automatic Machine IC Chip Burning Program Automatic Writing Equipment Can Do Chip And Plug-In Machine Creo(ProE) 3D Model

Full-automatic machine IC chip burning program automatic writing equipment can be done patch and plug-in machine 3D model, a set of fully automatic IC chip program automatic writing equipment, the main function of the equipment is to burn the program to the IC chip and other chips, the equipment has X Y Z Z axis W W four-axis composition, that is to say, there are two Z-axis to do the up and down movement, each Z-axis is a separate, and there are two rotary axis were driven by the suction nozzle Rotary correction angle, XY structure is similar to the paste machine movement speed is very fast by a 400W and 750W servo motors and screw drive, the device has 4 sets of internal burner at the same time for the program writing work, the equipment in front of the tray loading machine is the material supply to the equipment, the four-axis manipulator from the equipment in front of the material supply machine in the tray to absorb the product of the burner in the device, all the structure and motion All structures and movements are designed to prevent the chip machine, feeding machine can be stacked once 20 trays of material for the operation of the equipment, stacking structure has two groups of the most outside of this group is used to put materials on the tray, by the inside of the equipment, this group is to give the empty tray automatically flow out when the cylinder top up to recover the empty tray with the name of the equipment assembly diagram: PG17-000000-01 automatic IC chip burner equipment for the unmanned operation of the structure and design thinking are very good, the drawings are complete this set of feeding machine is also can learn a lot of things, there are similar equipment can learn from these structures to use, welcome to download here is the best and most complete set of drawings quality is the best thank you.