Fiber Optic Head Assembly Machine Network Signal Plug Assembly Machine Non-Standard Assembly Equipment SolidWorks 3D Model

Fiber optic head assembly machine network signal plug non-standard assembly equipment a… Equipment Description This equipment applies to products for: fiber optic head, signal plugs, communication connectors, all kinds of fiber optic connectors assembly. The equipment is a new fiber optic head automatic assembly machine: equipment is mainly used for fiber optic network interface communication and signal butt interface and other products assembly, equipment for carousel operation, feeding bit is divided into three vibration plate and a material tray for feeding, that is, by the four fiber optic head parts assembled together, assembled finished product is commonly used in the fiber optic head, assembled parts: fiber optic shell, fiber optic plastic parts, fiber optic metal parts, fiber optic core is also the most in the needle fiber optic head, the most in the needle fiber optic head. Fiber optic core is also the most in the needle fiber optic head, the device uses a large turntable and two small turntable to complete the assembly and loading, the middle of the largest turntable for the 16-station divider design, the small turntable which is on the fiber optic core of the turntable is also 16-station, the robot from the loading tray to the fiber optic core clamped to the turntable in the rule of the positioning of the good for the assembly of fiber optic plastic parts, the overall principle of the device’s action is to take the material to the small turntable, the turntable, the robot to take the material to the small turntable, the turntable to assemble the fiber optic plastic parts. Material to the small turntable, the turntable rotates to the docking station and the big turntable, the big turntable in the cylinder clamping products to the big turntable in the fiber optic head assembled, when the big turntable rotates to the next station, the stepper motor drives the small turntable for the plastic parts, another vibration plate for the fiber optic shell on the vibration disk, the same is by the pneumatic manipulator clamped to the big turntable for assembly, receiving position is also a manipulator when the assembly of finished fiber optic head Rotating to the lower material position, the robot clamps the finished product into the receiving tray placed one by one, to be received after the tray is full of equipment alarm prompts the manual receipt of material, the above fully automatic principle of operation of this equipment. II. The main assembled parts of the equipment are as follows: 1, fiber optic core feeding: products placed in the plastic box, feeding robot from the plastic box to take away the product into the rotating disk, can minimize the time to change the material, and there is a lack of material alarm function. 2, fiber optic plastic parts feeding: plastic parts for the vibration plate and straight vibration transmitter with the realization of automatic feeding, and has a lack of material alarm function. 3, fiber optic metal parts feeding: metal parts for the vibration plate and direct vibration transmitter with the realization of automatic feeding, and has a lack of material alarm function. 4, Fiber optic shell parts feeding: fiber optic shell parts are also vibrating plate and direct vibration transmitter to achieve automatic feeding, and have a lack of material alarm function. 5, splitter turntable: 16-station rotary disk, large turntable is divided into three layers, the bottom layer of the rotary disk and fixed fixtures and other operations, the middle layer of the cylinder clamping mechanism for the fixation of the top layer for the installation of the junction box gas pipe alignment, etc. 6, feeding and discharging robot: sucking up the product from the indexing plate, and according to the software instructions of the attributes of the function of the feeding and discharging robot to set up automatic switching of the material, and so on. Above is the function and principle of this equipment there are many more, more details of the part here will not be introduced have like to directly download the study can be, other more clever design structure you download can have time to slowly learn to study, this is a very good set of fiber optic head automatically assembled equipment drawings, welcome everyone to learn to study thank you. Three main technical parameters: Category Specifications Dimensions: 2100 * 1700 * 2000MM (L * W * H) Input Voltage: AC-220V50Hz or AC-380V 50Hz optional Maximum Power: 2.2K W (220V) Input Air Pressure: 0.4 – 0.6 Mpa Air Consumption: 0.4 – 0.6 Mpa 0.6 Mpa gas consumption: 1.5 L/min Production efficiency (C/T): ≤ 4.0 S / a equipment load rate: ≥ 95% processing mode: automatic picking, loading, automatic assembly, automatic receipt of the robot movement resolution: 0.005 mm robot repetitive positioning accuracy: ≤ ± 0.02 mm control and communication mode: manual release of the disk scheduling: touch-screen parameter changes