Fiber Optic Head Assembly Machine Network Signal Plug Assembly Machine Non-Standard Assembly Equipment – 3D Model SolidWorks
Optical fiber head assembly machine, network signal plug non-standard assembly equipment 1. Equipment Description The products suitable for this equipment are: fiber optic heads, signal plugs, communication connectors, and the assembly of various types of fiber optic connectors. This equipment is the latest fully automatic assembly machine for optical fiber heads: the equipment is mainly used for the assembly of optical fiber network port communications and signal interface products. The equipment is a turntable operation. The loading position is divided into three vibration plates and one material plate. Loading, that is, assembling 4 fiber optic head parts together. The assembled finished product is a commonly used fiber optic head. The assembly parts are: fiber optic shell, fiber optic plastic parts, fiber optic metal parts, and the fiber core is the middle needle fiber. First, the equipment uses a large turntable and two small turntables to complete assembly and loading. The largest turntable in the middle is designed as a 16-station divider. Among the small turntables, the turntable for upper optical fiber cores is also a 16-station one. The manipulator starts from the loading tray. Clamp the optical fiber core and place it in the center of the turntable, position it, and assemble it into the optical fiber plastic parts. The overall operating principle of the equipment is that the loading manipulator takes the material into the small turntable, and the turntable rotates to dock with the large turntable. When the big turntable is in the next position, the cylinder in the big turntable clamps the product and assembles it in the fiber head of the big turntable. When the big turntable rotates to the next station, the stepper motor drives the small turntable to load the plastic parts. The other vibrating plate is the fiber optic housing. The loading vibrating plate is also clamped by a pneumatic manipulator to the large turntable for assembly. The collecting position is also the manipulator. When the fiber head of the assembled finished product rotates to the unloading position, the manipulator clamps the finished product and puts it into the collecting plate one by one. Place it well, and when the collecting tray is full, the equipment will alarm and prompt you to manually collect the materials. The above is the fully automatic working principle of this equipment. two. The main assembly parts of the equipment are as follows: 1. Optical fiber core loading: The product is placed in a plastic box. The feeding robot removes the product from the plastic box and puts it into the rotating disk, which can minimize the material changing time. It also has a material shortage alarm function. 2. Fiber optic plastic parts loading: Plastic parts are automatically fed by the combination of the vibration plate and the direct vibrator, and have a material shortage alarm function. 3. Optical fiber metal parts loading: The metal parts are automatically fed by the vibration plate and the direct vibration feeder, and have a material shortage alarm function. 4. Optical fiber housing parts loading: The fiber optic housing parts also use a vibration plate and a direct vibrator to realize automatic feeding, and have a material shortage alarm function. 5. Divider turntable: 16-station rotating disk. The large turntable is divided into three layers. The bottom layer is for rotating disks and fixed fixtures. The middle layer is for fixing the clamping mechanism of each cylinder. The uppermost layer is for installing the junction box and air pipe. Line, etc. 6. Loading and discharging manipulator: absorb the product from the indexing plate, and automatically switch materials according to the attributes indicated by the software, the function settings of the loading and unloading manipulator, etc. The above is the function and principle of this device. There are many more. More details will not be introduced here. If you like it, you can directly download and study it. After downloading other more ingenious design structures, you can have time to study and study them slowly. This is a very good set of drawings of automatic optical fiber head assembly equipment. Everyone is welcome to study and study. Thank you. Three main technical parameters: Category specification parameters Overall machine dimensions: 2100*1700*2000MM (L*W*H) Input voltage: AC-220V50Hz or AC-380V 50Hz optional Maximum power of the whole machine: 2.2KW (at 220V) input Air source pressure: 0.4-0.6 Mpa Air consumption: 1.5 L/min Production efficiency (C/T): ≤4.0 S/one equipment utilization rate: ≥95% Processing method: automatic picking, loading, automatic assembly, automatic Movement resolution of the collecting manipulator: 0.005 mm Repeatable positioning accuracy of the manipulator: ≤±0.02 mm Control communication method: Manual placement programming method: Touch screen parameter modification
Specification: Fiber Optic Head Assembly Machine Network Signal Plug Assembly Machine Non-Standard Assembly Equipment – 3D Model SolidWorks
|
User Reviews
Be the first to review “Fiber Optic Head Assembly Machine Network Signal Plug Assembly Machine Non-Standard Assembly Equipment – 3D Model SolidWorks”
You must be logged in to post a review.
There are no reviews yet.