Cast Aluminum Rotor Shaping Palletizer 3D Model + PPT Equipment Analysis Exported 3D Model

Equipment using automatic riveting point leveling, automatic leveling stator yards in the turnover basket, the requirements to achieve: the arrangement of disorderly rotor sorting, divided into positive and negative → automatic riveting point leveling → automatic palletizing; at present, just has not been refined, within the annex program! n Analysis of each part; n Pickup robot 01: the robot with 180-degree rotation of the air claw, air claw clamp product outer ring, grab the product will be based on the front of the CCD visual inspection to detect the direction of the product to determine whether it needs to be turned over, and then place the product on the positioning of the center of the rotary position, the clamping of the outer ring of the product to facilitate rotation; n Positioning center: This position has the function of rotating direction positioning, which can position the products with direction requirements; n Pick-up robot 02: The function of this robot is to grab and place the products from the center rotary station to the turntable feeding station; n Pre-pressing station: This position pre-presses the products in the leveling line to ensure that the products can be placed parallel to the workpiece panel; n Leveling station 01: roughing, roughing, a knife fly off most of the rivets need to be leveled, retaining the margin; n Leveling station 02: Finishing, finishing, less removal, to avoid a knife over the whole out of the surface is not smooth, burr more; n Inspection section: use laser torque measurement to test whether the rivet point is within the appropriate range after leveling to determine qualified and defective; n Chamfering station: chamfering and deburring the flat products; n Discharging station: After the inspection is completed, the station will be transferred to wait for the assembly robot to divide the materials; ….. NG line: the robot automatically yards the qualified products to the crate, the unqualified products are caught on the NG line, the NG line will cache a certain amount of defective products, after reaching the amount of alarm prompts the workers to pick up, n Send to palletizer, code to the defective products turnover box; n Turntable assembly: the bottom of the turntable is installed with heavy-duty bearing support, that is, to play a supporting role, without affecting the turntable rotation;