Car Sunroof Primer Workstation 3D Digital Model + BOM + Design Instructions – 3D Model SolidWorks
The process flow of the car sunroof primer workstation: take the glass piece – place the glass on the tray – appearance inspection – take the cleaning bottle – clean the glass – put the cleaning bottle back – wipe the cleaning agent – discard the wiping paper – take the primer bottle – apply primer on the glass – put the primer bottle back – wipe the primer on the detection hole – paste the process label – move the suction cup to the next station
1. Basic function:
Function: A workbench with a rotatable tray to hold a single piece of glass, and can complete glass inspection, cleaning, and primer coating operations, with exhaust/exhaust interface
Error-proofing function:
1. The order of using cleaning agent and primer
2. Felt head counting
3. Bottle filling timing
3. Operators
1. Number of operators: 1
2. Working posture – standing operation
4. Durability
1. Continuous use time – 24 hours/day
2. Durability – more than 10 years
V. Capacity
1. Total cycle time – < 45 sec
2. Manual operation time - < 45 sec
3. Product switching tool adjustment time - < 1 min (height adjustment, support width adjustment)
VI. Working environment
1. Noise level - less than 70dB from the noise source to 1m away
2. Irritating gas - chemical gases such as butanone are discharged from the air duct
VII. Power specifications
1. Power specifications - single-phase 220V 50Hz
2. Air source specifications - 6 ± 1 Kg/cm2
Specification: Car Sunroof Primer Workstation 3D Digital Model + BOM + Design Instructions – 3D Model SolidWorks
|
User Reviews
Be the first to review “Car Sunroof Primer Workstation 3D Digital Model + BOM + Design Instructions – 3D Model SolidWorks”
You must be logged in to post a review.
There are no reviews yet.