Brake Disc Truss Automatic Machining Line Design Model SolidWorks 3D Model

Brake disc automatic machining line program truss, Truss robot has 3 servo axes: X-axis, Z1-axis, Z2-axis, respectively, and installs 2 symmetrically arranged fingers. The whole machine is divided into stand, truss robot, loading bin, unloading bin, turning cleaning machine, corner positioning machine, manual sampling line, commutator, blowing cleaning system and so on. The stent part contains column profile support, safety net, adjustment mechanism, artificial ladder, etc.; the robot part contains X-axis driving system, Z1-axis driving system, Z2-axis driving system, robot arm, clamping mechanism, clamping fingers, etc.; the upper material bin part contains conveying system, positioning system, stopping system, etc.; the lower material bin part contains conveying system, stopping system, etc.; the reversing machine contains positioning system, clamping system, turning system, etc.; the angle positioning machine contains inspection system, etc.; the corner positioning machine contains inspection system, cleaning machine, blowing cleaning system, etc.; the machine is divided into the whole machine. etc.; Angle positioning machine contains detection system, rotation system, etc.; Manual sampling line contains storage system, positioning system, sampling system, etc.; Chip liquid dumping system contains turning system, filtering and recycling system, etc.; Blowing cleaning system contains high-pressure cleaning system, filtering and recycling system, turning system, high-pressure air cleaning system, etc.