Automatic Insulation Film Barcode Applying Equipment/Power Battery PET Protective Film Applying Machine SolidWorks 3D Model

The equipment is a power pack battery PET adhesive paper machine labeling machine integrated equipment, the equipment drawings have 400MB large and small parts map adds up to almost 400, the device’s 3D model using SolidWorks 2012 software design drawings, a full set of drawings for the original original gear full set of complete 3D model design drawings, this equipment non-standard automated power battery PET Protective film machine labeling machineAutomatic paste insulation film paste bar code equipment applicable products for: lithium batteries, polymer batteries, all kinds of soft pack power battery film paste labeling paste bar code, etc., the equipment is mainly through the film feeder needs to be pasted film paste to the surface of the battery, this set of film feeder in the packaging industry is also can be used because it is a set of standard mechanism is also very stable. When the battery comes in from the conveyor belt, the core robot grabs the product and puts it into the secondary positioning sliding table of the filming station, and then the sliding table module at the bottom moves to drive the core to the filming position, and then it starts to peel off the film to apply the film and the sliding module goes outward while applying the film while rolling and pressing, so that the filming machine applies the film out basically there is no vapor bubble, and the application is very good and the application of the film is also very fast, and the application of the filming position is the rolling type of application of film, and its action and principle is that the product is in the positioning position of the film, and then the film is applied to the surface of the battery. Action and principle is, the product is fixed in the positioning seat by the module manipulator to move to the film position, and then by the film machine to film the battery surface module for the first stick to the surface of the module to move outward while walking and sticking the rolling sticker is called the rolling film machine, so this way out of the film surface will not have air bubbles, after the film by the handling manipulator, grabbing the battery to another workstation, for labeling bar code, here before sticking will be mounted first a Aluminum shell in the middle of the battery, the same is also grabbed by the robot and installed, and then the robot grabs the battery module for labeling, and then rotate the flip side of the battery module assembly and other operational processes, the equipment can also be used in different industries for the labeling of the film, the main technical parameters of the power battery labeling PET protection labeling machine: Category Specification Parameters Machine size: 3850 * 1720 * 1700MM (L * W * D), the surface of the film will not be air bubbles. 1700MM (L * W * H) Input voltage: AC-220V50Hz or AC-380V 50Hz optional Maximum power: 0.5K W (220V) Input gas pressure: 0.4-0.6 Mpa Gas consumption: 1.5 L/min Production efficiency (C / T): ≤ 3.0 S / A equipment utilization rate: ≥95% Processing mode: automatic detection, automatic lamination, automatic discharging Material changing mode: manual material changing Programming mode: touch screen parameter modification. n The drawings have a detailed structure and considerable details worth learning.