ACF Slitting Machine – 3D Model SolidWorks

ACF slitting machine
1. Automatic material discharge, the inner diameter of the barrel is φ75MM, the thickness of the coil is 0.15MM, the width of the material is 50MM, and it can accommodate a space with a length of 200 meters.
2. The cutter is required to cut the coil into 16 strips of 2.0MM±0.05MM, and there must be no obvious step difference visible to the naked eye, and the cutting must be thorough. The fluctuation or serpentine deviation within each meter is not more than 0.1MM.
3. The service life of the cutter is not less than 3000 hours, and it is easy and convenient to replace. Two people can operate for no more than 2 hours, including the knife setting time. The knife setting cannot be more than 20 minutes, and each knife setting can run for at least 50 hours.
4. The finished product of the material collection is automatic, the tension force is adjustable, and the finished product cannot have glue loss, scratches, indentations, wrinkles, or cleanliness (abnormal incoming materials are the responsibility of Party A).
5. See the sample for the storage of finished products. The storage of finished products should be simple and convenient. After cutting, the materials are collected and replaced until the next cycle begins. It can be completed by a single person in 30 minutes.
6. The waste materials need to be stored, and the replacement cycle is synchronized with the material replacement time.
7. The ACF adhesive protective film needs to be designed for separation and storage. (The protective film may be separated after cutting).
8. The slitting speed and the material collection and release must be linked and adjustable (0~0.5 m/s), and the acceptance is based on 0.25 m/s per second.
9. All parts can be replaced with 32 groups of cutting at a later time.
10. The equipment is used in a clean environment without dust or grinding. If there is dust, it must be isolated and stored, and marked.
1. Voltage: AC 220V single phase 50Hz;
2. Power: ≤1KW;
3. Air pressure: 0.5~0.7Mpa;
4. Noise: ≤75dB;
5. Weight: 600KG;
5. Machine size: L1400mmxW1000mmxH1950mm;
6. Machine color: computer gray and black;