ACF Slitter SolidWorks 3D Model

ACF slitting machine n1, automatic discharging, barrel inner diameter of φ75MM, roll thickness of 0.15MM, material width of 50MM, can accommodate the length of 200 meters of material length of the space. n2, the cutter is required to slice the rolled material into 16 strips of 2.0MM ± 0.05MM, there can be no obvious visible segment difference gross times, the slitting must be thorough. Fluctuation or serpentine deviation within each meter is not greater than 0.1MM. n3, the service life of the cutter is not less than 3,000 hours, easy and convenient to replace, 2 people operating no more than 2H, including knife time. The knife can not be greater than 20 minutes, each knife can run at least 50H. n4. The finished products are automatically collected, the tension is adjustable, and the finished products can’t have dropped glue, scratches, indentation, wrinkles, and clean appearances (the incoming abnormalities are the responsibility of Party A). n5, receiving the finished product savings see sample, finished products need to be simple and easy to put away, cutting is finished receiving and changing the material to the next cycle begins, a single person operation can be completed in 30 minutes from the beginning. n6, the waste material needs to be set up storage, replacement cycle and material change synchronization time. n7, ACF adhesive protection film, need to design separation and stowage. (The protective film may be separated after cutting). n8, cut strip speed and stowage must be linkage adjustable (0 ~ 0.5 m / s), acceptance according to 0.25 m / s per second acceptance. n9, all parts of the later can be value-added replacement for the 32-component cut. n10, the equipment use environment is clean environment, there can be no dust, powder grinding production, if any must be set up to isolate, stowage, good marking. n1, voltage: AC 220V single-phase 50Hz; n2, Power: ≤ 1KW; n .3, Air pressure: 0.5~0.7Mpa; n 4, Noise: ≤75dB;n 5, Weight: 600KG;n 5, Machine size: L1400mmxW1000mmxH1950mm; n6, Machine color: computer gray and black;