ACF Anisotropic Conductive Film Slitting Machine 3D+Engineering Drawing+BOM – 3D Model SolidWorks

Add to wishlistAdded to wishlistRemoved from wishlist 0
Sold by
Mary Quinn

ACF Anisotropic Conductive Film Slitting Machine Description:
1. Voltage: AC 220V single phase 50Hz;
2. Power: ≤1KW;
3. Air pressure: 0.5~0.7Mpa;
4. Noise: ≤75dB;
5. Weight: 600KG;
6. Machine size: L1400mmxW1000mmxH1950mm;
1. Automatic material discharge, the inner diameter of the barrel is φ75MM, the thickness of the coil is 0.15MM, the width of the material is 50MM, and it can accommodate a space of 200 meters of material length.
2. The cutter is required to cut the coil into 16 strips of 2.0MM±0.05MM, and there must be no obvious step difference visible to the naked eye, and the cutting must be thorough. The fluctuation or serpentine deviation within each meter shall not exceed 0.1MM.
3. The service life of the cutter shall not be less than 3000 hours, and the replacement shall be simple and convenient. Two people shall operate for no more than 2 hours, including the time for tool setting. Tool setting shall not exceed 20 minutes, and each tool setting can run for at least 50 hours.
4. Including drawings and standard parts list

Specification: ACF Anisotropic Conductive Film Slitting Machine 3D+Engineering Drawing+BOM – 3D Model SolidWorks

Industrial Use

Design Software

Version

Editable

File Formats

, , , ,

Sharing Level

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “ACF Anisotropic Conductive Film Slitting Machine 3D+Engineering Drawing+BOM – 3D Model SolidWorks”

ACF Anisotropic Conductive Film Slitting Machine 3D+Engineering Drawing+BOM – 3D Model SolidWorks
ACF Anisotropic Conductive Film Slitting Machine 3D+Engineering Drawing+BOM – 3D Model SolidWorks
3D Mechanical Design Library
Logo
Shopping cart