Car Sunroof GPA Trimming And Polishing Workstation 3D+Engineering Drawing+BOM+Instructions – 3D Model SolidWorks

Car sunroof GPA trimming and grinding workstation
1. Basic functions:
Place the car sunroof GPA and perform trimming and grinding, cleaning inspection, and sealing strip installation operations. The glass can be freely rotated horizontally, turned over (axially 180 degrees), and has a brake function
2. Error prevention function: None
3. Operators
1. Number of operators: 1 person
2. Working posture – standing operation
4. Durability
1. Continuous use time – 24H/day
2. Durability-more than 10 years
V. Capacity
1. Total cycle time-NA
2. Manual operation time-<60sec 3. Product switching tool adjustment time-<1min (only suction cup position adjustment) VI. Working environment 1. Noise level-below 70dB from the noise source to 1m away 2. Irritating gas-chemical gas such as butanone is discharged from the air duct VII. Power specifications 1. Power specifications-3-phase 380V 50Hz or single-phase 220V 50Hz 2. Air source specifications- 6±1Kg/cm2 VIII. Quality 1. Failure rate-no unexplained equipment problems caused by defects. 2.Precision requirements--Dimensions must be ≤±10mm