OP50 Input shaft mating drill and pinning n1.Purpose: Match drilling and pinning of input shaft with torsion bar; n2. Compatible products: XK507C, JLFC3C, SP232C; n3.Equipment specification: 1800mm(W)x1600mm(L)x2000mm(Aluminum profile H). n4.Equipment technical parameters n4.1 Equipment power: 20kw; n4.2 Gas source: ≥ 0.5Mpa oil-free, water-free clean compressed gas source. Gas consumption: 10 liters/min. n4.3 Equipment operation form: product loading/unloading is executed by the operator (manually), pin automatic loading, workpiece drilling, pin threading, etc. is completed automatically; n4.4 Indentation force monitoring: range 30KN, accuracy 1% R.O; holding time of not less than 3 seconds; bearing and screw service life ≥ 10 million times. n4.5 Press-in depth control: precision 0.02mm; with its own displacement control, and can be connected to high-precision displacement sensors n4.6 Press-in judgment: whether the pressure and displacement are within the qualified range. n4.7 Machine Replacement: The work fixture to be replaced is placed under the equipment, and a special placing disk is manufactured
Specification: OP50 Input Shaft With Drilling Pin Inventor 3D Model
|
User Reviews
Be the first to review “OP50 Input Shaft With Drilling Pin Inventor 3D Model”
You must be logged in to post a review.
![OP50 Input Shaft With Drilling Pin Inventor 3D Model](https://3dmec.net/wp-content/uploads/thumbs_dir/240000326-101-1-qpqjft4c9k1t10x60st2tsv4p6n8nc4xstqvydoni4.png)
There are no reviews yet.