OP50 Sensor bracket press fit: n1.Purpose: Sensor bracket with O-ring installed is pressed into bearing; sensor bracket assembly and turbine assembly are press-fitted; n2. Compatible products: XK507C, JLFC3C, SP232C n3. Equipment specifications: 800mm (W) x 1200mm (L) x 2000mm (aluminum profile H). n4. Equipment technical parameters n4.1 Equipment power: 2kw; n4.2 Gas source: ≥ 0.5Mpa oil-free, water-free clean compressed gas source. n4.3 Equipment operation form: product loading/unloading is executed by the operator (manual), press-fitting work is completed by the equipment (automatic) n4.4 Press-in force monitoring: press pressure is 5KN, pressure sensor precision 0.3%FS, equipment with self-calibration function, with segmented monitoring curve. n4.5 Indentation displacement monitoring: precision ±0.02mm, full-stroke monitoring. n4.6 Qualified judgment: whether the pressure and displacement are within the qualified range. n4.7 Positional accuracy: the coaxiality of the center hole of the indenter positioning and the mounting hole of the tooling positioning is less than 0.05mm, and the perpendicularity of the indenter and the working table surface is 0.05mm. n4.8 Equipment requirements: the indenter adopts a floatable mechanism, while ensuring rigidity; indenter, fixture with recognizable sensors, the equipment can be automatically identified. n34 disk. n4.9 CPK value of the equipment ≥ 1.33; the accuracy of the parts of the press and the accuracy of the press fitting are accepted according to the requirements of the drawings.
Specification: OP50 Sensor Holder Press Fit Inventor 3D Model
|
User Reviews
Be the first to review “OP50 Sensor Holder Press Fit Inventor 3D Model”
You must be logged in to post a review.
![OP50 Sensor Holder Press Fit Inventor 3D Model](https://3dmec.net/wp-content/uploads/thumbs_dir/240000324-101-1-qpqjft4c9k1t10x60st2tsv4p6n8nc4xstqvydoni4.png)
There are no reviews yet.