Cable is pushed into the chute through the fixture positioning, and then transported to the following stations in sequence by using the pusher jaws: cutting, stripping, flux & tinning, tinning, soldering, etc., and finally the USB-3.0 connector is soldered to the cable according to the requirements, and the finished product is transported to the position of the positioning station through the recycling mechanism, and then the cycle is carried out. Efficiency Assessment: Taking the cycle of (core wire cutting, stripping, fluxing & tinning, core wire tinning, connector sorting & positioning, connector soldering, etc.) which takes about 10 seconds for the completion of the operation, and producing 2 cables, the production capacity is estimated to be 720pcs/h. ….. USB-3.0 wire processing line staffing: (1 person) 1 person, depending on the wire positioning proficiency.
Specification: USB-3.0 Cable Processing Line Exported 3D Model
|
User Reviews
Be the first to review “USB-3.0 Cable Processing Line Exported 3D Model”
You must be logged in to post a review.
![USB-3.0 Cable Processing Line Exported 3D Model](https://3dmec.net/wp-content/uploads/thumbs_dir/220002520-101-1-qpqjg4eejkh8wcgs6xolnq0ntt3n7pdpudkppp7xfg.png)
There are no reviews yet.