OP170 Motor Pressure Speed Magnetic Coil, RPS Coil – 3D Model Inventor

OP170 motor press speed magnetic ring, RPS coil
1.Purpose: press the speed magnetic ring and RPS coil into the tail of the motor
2.Compatible products: D575000
2.Equipment operation process
1) Take the motor, visually check if it is qualified, and scan the code with a code reader (manual 3s)
2) Put the motor into the lower fixture (manual 1s)
3) Take the speed magnetic ring, visually check if it is qualified, and insert it into the upper fixture (manual 2s)
4) Take the RPS coil, visually check if it is qualified, and scan the code with a code reader (manual 3s)
5) Put the RPS coil into the upper fixture, ensure the direction through the fixture, vacuum adsorption is completed, the light is on, and let go (manual 3s)
6) Press the start switch (manual 1s)
7) After the moving door drops to a safe height, the servo press drives the speed magnetic coil to press down (6s)
8) After the press-fitting is completed, the press head automatically retracts (3s)
9) The clamp switching cylinder moves horizontally and moves the motor to the bottom of the coil pressing station (2s)
10) The servo press drives the coil to press down (6s)
11) If the pressing is qualified, the press head automatically retracts
At the same time, the moving door rises (3s)
12) Manually remove the workpiece and transfer it to the next process (unqualified alarm, manually take out the unqualified workpiece, put it in the NG box, trigger the NG photoelectric, and reset the system) (manual 2s)