OP220+OP230 ECU And Motor Assembly Station – 3D Model Inventor

OP220+OP230 ECU and motor assembly table
1.Purpose: Assemble ECU and wiring harnesses on the motor with screws
2.Compatible products: A13TE, FE-3DA, ZTM11E
3.Equipment specifications: 2000mm(W)x1500mm(L)x2000(H).
4.Production cycle: ≤50s
5.Equipment technical parameters
5.1Equipment power: 5kw;
5.2Air source: ≥0.5Mpa oil-free, water-free clean compressed air source. Air consumption: 3L/min.
5.3 Equipment operation mode: Product loading/unloading is performed by the operator (manual), and assembly work is completed by the operator (manual)
5.4 Electric tightening wrench accuracy: ±5% Nm
5.5 Qualification judgment: Bolt tightening torque is within the required range;
6. Control points: Fixture error prevention; Missed tightening error prevention (torque gun torque feedback); Marker pen inspection; Manual wrench confirmation