OP50 Input Shaft With Drilling And Pinning – 3D Model Inventor

Add to wishlistAdded to wishlistRemoved from wishlist 0

OP50 Input shaft drilling and pinning
1.Purpose: Drill and pin the input shaft and torsion bar
2.Compatible products: XK507C, JLFC3C, SP232C
3.Equipment specifications: 1800mm(W)x1600mm(L)x 2000mm(aluminum profile H).
4.Equipment technical parameters
4.1Equipment power: 20kw
4.2Air source: ≥ 0.5Mpa oil-free, water-free clean compressed air source. Air consumption: 10L/min.
4.3 Equipment operation mode: Product loading/unloading is performed by the operator (manually), pins are automatically loaded, workpiece drilling, pin insertion, etc. are automatically completed;
4.4 Pressing force monitoring: range 30KN, accuracy 1%RO; pressure holding time is not less than 3 seconds; bearing and screw service life ≥ 10 million times.
4.5 Pressing depth control: accuracy 0.02mm; with displacement control, and can be connected to high-precision displacement sensor
4.6 Pressing judgment: whether the pressure and displacement are within the qualified range.
4.7 Machine model replacement: The fixture to be replaced is placed under the equipment, and a special placement plate is made.

Specification: OP50 Input Shaft With Drilling And Pinning – 3D Model Inventor

Industrial Use

Design Software

Version

Editable

File Formats

, , ,

Sharing Level

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “OP50 Input Shaft With Drilling And Pinning – 3D Model Inventor”

OP50 Input Shaft With Drilling And Pinning – 3D Model Inventor
OP50 Input Shaft With Drilling And Pinning – 3D Model Inventor
3D Mechanical Design Library
Logo
Shopping cart