OP50 Sensor Bracket Press Fit – 3D Model Inventor

OP50 sensor bracket press-fitting:
1.Purpose: Press the sensor bracket with O-ring installed into the bearing; press the sensor bracket assembly and turbine assembly;
2.Compatible products: XK507C, JLFC3C, SP232C
3.Equipment specifications: 800mm(W)x 1200mm(L)x2000mm(aluminum profile H).
4.Equipment technical parameters
4.1Equipment power: 2kw;
4.2Air source: ≥ 0.5Mpa oil-free, water-free clean compressed air source.
4.3Equipment operation mode: Product loading/unloading is performed by the operator (manual), and the press-fitting work is completed by the equipment (automatic)
4.4Pressing force monitoring: The press pressure is 5KN, the pressure sensor accuracy is 0.3%FS, the equipment has a self-calibration function, and there is a segmented monitoring curve.
4.5 Press-in displacement monitoring: accuracy ±0.02mm, full stroke monitoring.
4.6 Qualification judgment: whether the pressure and displacement are within the qualified range.
4.7 Position accuracy: the coaxiality between the center hole of the pressure head positioning and the tooling positioning installation hole is less than 0.05mm, and the verticality between the pressure head and the workbench is 0.05mm.
4.8 Equipment requirements: The pressure head adopts a floating mechanism while ensuring rigidity; the pressure head and fixture are equipped with identifiable sensors, and the equipment can automatically identify them.
34 plates.
4.9 Equipment CPK value ≥1.33; the precision of the pressed parts and the pressing precision are accepted according to the requirements of the drawings.