Airmate Automatic Glue Pre-Pressing Machine Equipment (Complete 3D Drawings + 2D Engineering Drawings + Purchase List) – 3D Model SolidWorks

Airmate automatic glue pre-pressing machine, this set of drawings has complete 3D drawings (Airmate automatic glue pre-pressing machine 3D file) and 2D engineering drawings and parts standard parts procurement list (project: “Airmate automatic glue pre-pressing machine” bom table.xls), this production line is made for Shenzhen Airmate Electric Co., Ltd., a fully automatic glue pre-pressing equipment, this equipment can be used for 8 similar products for glue pre-pressing, the total length of this production line is close to 10M, the overall structure adopts a frame structure, this equipment line is divided into It consists of two sections, one section is the conveying and gluing part, the other section is the conveying and pre-pressing part, and the pressing part is the back section. The conveyor belt of this machine is a PVC belt with two motors driving the transmission through chains. When the product is placed on the water flow board of the conveyor belt, it starts to be conveyed. When it reaches the gluing position, the three-axis gluing robot starts to glue the position that needs gluing. When the water flow board enters the back end, it can be automatically pre-pressed. Generally, the manual work only needs to put the product at the front end, and the equipment completes all the gluing and pre-pressing work, which effectively reduces and relieves manpower. Solidworks2011 design source file sharing.