Fully Automatic IC Chip Burning Program Automatic Writing Equipment Can Be Used As Patch And Plug-In Machine – 3D Model ProE Creo.Elements

The fully automatic IC chip burning program automatic writing equipment can make 3D models of patch and plug-in machines. It is a set of fully automatic IC chip program automatic writing equipment. The main function of the equipment is to burn the program into IC chips and other chips. The equipment consists of four axes: XYZZ axis and WW axis, that is, there are two Z axes for up and down movement, each Z axis is independent, and there are two rotating axes to drive the nozzle to rotate and correct the angle. The XY structure is similar to the mounting machine. The movement speed is very fast. It is driven by a 400W and 750W servo motor and a screw rod. The internal There are 4 groups of burners writing programs at the same time. The tray loader in front of the equipment is used to feed the equipment. The four-axis manipulator draws the product from the tray of the feeder in front of the equipment into the burner. All structures and movement methods are designed for anti-chip machines. The feeder can stack 20 trays of material at a time for the equipment to run. The stacking structure has two groups. The outermost group is used to place trays with materials. The group inside the equipment is used to lift up the cylinder to recover the empty trays when the empty trays automatically flow out. The name of the equipment assembly drawing is: PG17-000000-01. The automatic IC chip burner equipment is unmanned operation. The structure and design ideas are very good. The drawings are complete. You can learn a lot from this set of feeders. If there are similar equipment, you can refer to these structures for use. Welcome to download the best and most complete set of drawings here. The quality is the best. Thank you.