Automobile steering fixed knuckle press-in assembly machine Automobile steering fixed knuckle, loading clamping press-in, with pressure sensor to sense pressure and position sensor to ensure press-in in place. n1.Clamping servo screw drive jaws move the corresponding distance according to the size of the outer diameter of the mandrel (universal outer diameter size 17-35mm); n2. The servo press moves according to the height of the mandrel by the corresponding distance n (common height size 200-900mm); n3. Manually put the mandrel into the machine and pull back the chuck for pre-positioning; n4. Start the equipment to clamp the servo screw to carry the chuck to clamp and position the mandrel, and at the same time, the counter-extraction chuck is in contact with the counter-extraction force point;
Specification: Automotive Steering Fixed Joint Press-In Assembly Device (PPT Detail) SolidWorks 3D Model
|
User Reviews
Be the first to review “Automotive Steering Fixed Joint Press-In Assembly Device (PPT Detail) SolidWorks 3D Model”
You must be logged in to post a review.
![Automotive Steering Fixed Joint Press-In Assembly Device (PPT Detail) SolidWorks 3D Model](https://3dmec.net/wp-content/uploads/thumbs_dir/220012972-101-1-qpqjg0n1s8c3lwm8sw23dqytg9m6cwyshuyrsldi4c.png)
There are no reviews yet.