Non-Standard Automation Equipment For Tooling Assembly Line Board Assembly And Dispensing Cycle Operation – 3D Model SolidWorks

complete set of drawings of the automated assembly and dispensing line, a lift tooling assembly line, and a cycle operation demonstration. The non-standard automated assembly and dispensing line can mainly complete the assembly of various components very well. The design idea of the overall line is very clear and the structure is very stable. The main conveying part is chain transmission and the lift is belt transmission. Especially the lifting part is well designed. The belt transmission structure in this lift can be used in various equipment. It has high versatility and flexibility. The quality of the drawings is very good. There will be no missing parts or inability to open after downloading. You can download it with confidence. This is a set of non-standard automatic assembly dispensing line with a complete set of drawings of the circulating operation of the tooling plate of the elevator. The drawings mainly reflect the technical level of modern automated unmanned operation. The total length of this line is about 7 meters. The front and rear ends are elevators responsible for conveying the flow tooling plate in the form of lifting and lowering cycles. The main line in the middle is the assembly body responsible for the assembly of some parts and components, such as dispensing, locking screws, testing, pressing assembly, inserting assembly, welding and other docking. The two sides of the main line are empty and are used to install some assembly machines. The assembly line tooling has some guide holes to ensure the assembly accuracy. The lower layer of the line is mainly to transport the empty tooling flow plate back for delivery. The middle part is the jacking structure of each station. Each corresponding station has a corresponding top structure to ensure the assembly accuracy of each station. The entire structure of this automatic line has been drawn with hole positions and standard parts, which can be seen in the figure. The overall line drawing is complete, which is very helpful for the design of the automatic line.