Fully Automatic High Speed Cartoning Machine Continuous Cartoning Machine Fully Automatic Cartoning Machine – 3D Model SolidWorks

Fully automatic high-speed cartoning machine Continuous cartoning machine Fully automatic cartoning machine can also be used as a mask packaging machine
Working principle The feeding of the automatic cartoning machine is generally divided into three entrances: the instruction manual entrance, the medicine bottle entrance and the machine bag box entrance. The whole process from the feeding of the machine bag box to the final packaging can be roughly divided into four stages: the carton is fixed by a guide rail and opened with a push plate. At the same time, two forward-movable card positions rise from the bottom, clamping the sides of the carton from the front and back directions, so that the box opens at right angles and moves forward to the filling area. After filling in the filling area, the mechanism of the machine will fold the ears into the left and right guide rails, and then close the lid. Before closing the lid, the mechanism will first bend the tongue of the carton, and then a push plate will push the lid to bend, so that the tongue is inserted into the box and the lock is fastened. The closing action is a critical action, and the quality of completion has a lot to do with the structure of the carton and the accuracy of the machine adjustment. Fully automatic high-speed cartoning machine drawing (full cam type), with 2 motors to achieve dozens of action cycles, instructions, and products are automatically loaded into the box: Contains solidworks2015 STP XT format, including parts drawings, component assembly drawings, and general assembly drawings. There are more than 1,400 parts. This product is suitable for the boxing and packaging of pharmaceutical aluminum-plastic plates, round bottles, special-shaped bottles, cosmetics, auto parts, toothpaste, office supplies, poker, etc. and similar items. It can automatically open the carton, box the items, and seal the boxes. The machine uses PLC to control the photoelectric monitoring of each part. It automatically rejects unqualified items during operation. If an abnormality occurs, it can automatically stop and display the reason so that the fault can be eliminated in time. The machine can be used alone or in conjunction with a blister packaging machine and its hot melt device or other equipment to form a complete production line. Main performance and structural features: 1. It adopts automatic opening (sucking) of boxes, folding instructions, unloading, feeding, batch numbering, sealing, detection and rejection, etc. The process is stable and low noise. 2. Adopt PLC and human-machine interface automatic control operating system, stepless frequency conversion speed regulation, high degree of automation, simple and easy to understand operation. 3. Adopt internationally renowned brand electrical components, stable and reliable performance. 4. Adopt mechanical overload automatic shutdown function to ensure human and machine safety. 5. Automatically reject packaged products with missing packaging or instructions to ensure the quality of packaged products. 6. With fault display, alarm and finished product counting functions, it is easy to maintain and handle faults. 7. Various automatic feeders and conveying mechanisms can be designed according to customer requirements. 8. Optional hot melt glue machine uses hot melt glue spraying to seal or design hot melt glue brushing device. 9. It can be connected with aluminum plastic packaging machine, pillow packaging machine, filling machine, soap making machine, inkjet printer (or supervision code system), labeling machine, online weighing instrument, three-dimensional packaging machine, heat shrink packaging machine, strapping machine, other production lines, etc. to achieve docking and linkage production. Main technical parameters Power supply: Ac380V three-phase five-wire power supply 50Hz Total power 2.5kW Production capacity Main machine running speed: 50-120 boxes/minute Gas consumption: 20 cubic meters/hour (pressure 0.5-0.8 MPa) Weight: about 1.2 tons