Non-Standard Automatic Flat Wire Cutting And Inspection Machine – 3D Model SolidWorks

Flat wire cutting inspection machine, FFC flat wire cutting CCD inspection machine
I. Equipment description This equipment is suitable for products: flat wires with a length of less than 200mm and a width of 6-30mm; the repeatability of the manipulator is ≤±0.01 mm 4. Inspection content: a: Appearance inspection b: The size of the metal conductor after cutting, the distance between the center line of the metal wire, the distance from the metal wire to the edge line, the reinforcement plate, etc. can all be inspected. The inspection accuracy can reach plus or minus 0.05mm. This equipment is FFC wiring processing equipment: the equipment adopts tray loading operation mode, and workers only need to put the FFC incoming materials on the material rack. The equipment automatically feeds and cuts them according to the set length. The cutting accuracy can reach 0.01. The length of the wire after processing needs to be further detected by the CCD vision system. The equipment has a simple and precise structure. The material-taking robot and the material-unloading robot work synchronously to suck the inspected products into the inspection platform. The inspection platform is made of vacuum suction plate. When the inspection is OK, the robot puts the product into the unloading conveyor belt and stacks it for unloading. The quantity of each stack is also operated according to the value set by the customer. Workers only need to collect the materials at the conveyor belt. Those who are interested in the overall operation principle of the above equipment are welcome to download and learn. Main technical parameters: Category Specifications Machine dimensions: 1850*1000*1800MM (L*W*H) Input voltage: AC-220V50Hz or AC-380V 50Hz optional Maximum power of the whole machine: 0.8KW (at 220V) Input gas source pressure: 0.4-0.6 Mpa Gas consumption: 1.5 L/min Production efficiency (C/T): ≤2.8 S/a Equipment utilization rate: ≥95% Adaptable product specifications: Flat wire with a length of less than 200mm and a width of 6~30mm; Robot repeat positioning accuracy: ≤±0.01 mm Inspection content: a: Appearance inspection b: The size of the metal conductor after cutting, the center line spacing of the metal wire, the distance from the metal wire to the edge line, the reinforcement plate, etc. can all be inspected. The inspection accuracy can reach plus or minus 0.05mm