Fully Automatic Camera Cover Logo Printing Machine – 3D Model SolidWorks

The fully automatic camera cover printing machine is designed for the logo printing of mini camera covers. Because the product logo consists of four colors, it needs to be printed in color, which requires high precision of the equipment. The machine is mainly divided into five parts: chassis part; safety protection part; automatic tray loading and changing part; robot loading part; product printing part. The automatic tray loading and changing part consists of a full tray clip, an empty tray clip, a tray stacking and disassembling mechanism, and a tray conveying mechanism. The operator puts five trays full of products into the full tray clip, and the tray removal mechanism separates the bottom tray of the stacked trays and puts it into the conveying mechanism. The conveying mechanism sends the tray to a fixed position, and the robot starts to take the materials. When all the products in the tray are taken out, the conveying mechanism sends the empty tray back to the empty tray clip, and the stacking mechanism stacks the empty trays, and the cycle continues; in the manipulator handling part, the robot will take the products in the positioned tray and put them into the fixture on the dividing plate, two at a time; in the printing part, 12-station intermittent motion is realized through the dividing plate. The first station is the robot loading station, the second station is for product pressing and positioning, the third station is printing station 1, the fifth station is printing station 2, the seventh station is printing station 3, the ninth station is printing station 4, and the eleventh station is the product unloading station. The space in the middle is mainly to allow each printed product to have more time to air dry and reduce the defective rate.